Powder coating in Utah.
Done properly.
Industrial and custom powder coating for OEM production runs, trailer builders, fab shops, and ornamental iron across northern Utah. Tight color specs on repeat parts. Two-to-three-day standard turnaround.
No part too small.
Some parts too big.
Quick facts
- Location
- Uintah, UTUintah, UT
- TurnaroundStandard turnaround
- 2–3 days2–3 business days
- Max partMax part size
- 20×10×10 ft20 × 10 × 10 ft
- Minimums
- NoneNone. Bring the one part.
Who we coat for
What we do
Powder coating
Single- and two-stage. Every finish. Steel, aluminum, cast, galvanized.Single- and two-stage. Gloss, satin, matte, texture, metallic, candy, clear. Steel, aluminum, cast, galvanized. Cured to spec, not to a timer.
Sandblasting & prep
Media blasting and phosphate pretreatment. The part nobody photographs.Media blasting to white metal, phosphate pretreatment, outgassing on castings. The part the coating depends on and nobody photographs.
Color matching
Full RAL plus custom. Your spec stays on file.Full RAL range plus custom matches. We keep your color and finish on file so run twelve looks like run one.
How a part goes through
Four steps. We don't skip the first two, which is most of the difference.
Blast
Rust, scale, old paint and mill finish come off. Profile goes on.
Pretreat
Wash and phosphate so the powder has something to hold onto for a decade.
Coat
Electrostatic application, checked for mil thickness. Masking where you asked for it.
Cure
Full cure at temperature, verified. Then it cools, then it's yours.
Same color, every run.
Your spec lives in our system: powder, finish, mil thickness, masking. Reorder by part number. Nobody has to remember anything, including us.
Two to three days. We mean it.
Standard turnaround from drop-off to pick-up. If a job can't make that, you'll hear it at the quote, not on day four.
We answer the phone.
A person in the shop picks up. They know where your parts are. This is apparently a differentiator.
The oven is twenty feet long.
Max part envelope 20 × 10 × 10 ft. Trailer frames, long rail sections, gates, full bumper sets in one batch. If your part is bigger than that, it is one of the parts too big, and we will say so immediately and without drama.
- Length
- 20'
- Width
- 10'
- Height
- 10'
Recent work
See the gallery →
Questions people ask
Straight answers. The full list covers cost, durability, substrates, minimums, and pickup.
All questions →How long does powder coating take?
Standard turnaround is two to three business days from drop-off. Large batches and custom colors are quoted individually. Rush is available when the schedule allows.
What does powder coating cost in Utah?
Pricing depends on part size, prep required, color, and quantity. Small parts are priced per piece; trailer frames and railings are quoted by the job. Send dimensions and a photo and we'll quote it the same day.
Is powder coating better than paint?
For metal that lives outdoors or takes abuse, yes. It's thicker, harder, more chip- and UV-resistant, and has no solvents. Paint is easier to touch up. That's the trade.
Do you have a minimum order?
No. One bracket is a job. We do prefer that it is a bracket you care about.
Send us the part.
Dimensions, quantity, color, when you need it. We'll quote it today.Dimensions, quantity, color, when you need it. A photo helps. We'll quote it today.